Designed and manufactured by us to be a more cost effective solution to what is currently on the market.
The kit includes the following parts
LH Rear Caliper Bracket
RH Rear Caliper Bracket 2x Hub Spacers
2x Disc Shims (used on some early hubs only) 4x Caliper Bolts and Spring Washers 6x Hub Spacer Retaining Screws
10x Brake Disc Bolts
10x Brake Disc Washers In addition to this kit you will need to purchase the following stock LR parts
Caliper LH - SMC500240 Caliper RH - SMC500110 Brake Disc x2 - LR018026 Brake Pad set - SFP0000270 Pad Fitting Kit - STC8574 Longer Wheel Studs x10 - FRC7577 (only needed on some wheel configurations) Designed as a DIY kit you will need to complete some machining to your hubs in order to mount the brake discs, A drawing will be supplied with the key information in order for this to be carried out.
We also offer an option for the mounting to support the fitment of a Electronic Park Brake (EPB) Please choose which version you would like when ordering.
The hub part numbers are FRC3875 if you have the same size bearings front and back of the hub.
Or
576844 if you have the earlier big bearing / small bearing setup.
Please note: This kit will not fit if you are using standard Series / Defender steel wheels. The following wheels have been tried and offer enough clearance for the caliper.
